IPad with tempered film, you can take a look at the model of your iPad, and then go to this store or online to purchase this tempered film and stick it on yourself. Then, use a bank card to scrape it from top to bottom along this edge, which is very convenient. Generally, tempered films purchased will have a dedicated positioning sticker, and you can label and operate according to the positioning sticker.

It is a bit difficult to apply tempered film to an iPad because its screen is relatively large. During the film application process, it is necessary to do relevant cleaning in advance. If it is not cleaned thoroughly, the tempered film may become dirty or have bubbles like bumps, which may make it uncomfortable to look at. The film should be applied quickly, wiped clean, and placed flat, and it will absorb on its own. The suggestion is to choose a relatively quiet environment around the area, and add some strong lighting to better reflect whether there is dust. It is best to wear a mask.

The following is the specific film application process

1. Cleaning the Screen - First, wipe the screen with a dust-free wipes, then clean it with a clean cloth. Use the dust removal sticker to remove the dust. First, use the matching film kit or use a dust-free wipes to wipe the screen, then clean it with a clean cloth. Use the dust removal sticker to remove the dust. Be sure to wipe it carefully and follow one direction.

2. Preparation before applying the film - Before applying the tempered film, remove the layer of film that comes with the phone, otherwise it will affect the clarity. Then, take out the protective film from the packaging, do not tear off the release film, and directly place it on the phone screen to obtain a preliminary impression of the film application.

3. Tear off a part of the release film No.1 and align it. Stick the labels on both sides of the front of the film and gently place the film on the screen.

4. Press and fit. Press the middle position of the film with your hand, the film will automatically adhere, and finally squeeze out some small air.

5. Simply tear off the release film # 2 completely and wipe the screen with a dust cloth to make the film smoother and more comfortable.