Do iPad tablets require film application? What are the techniques for applying film? How to prevent foam? Today, we will introduce the film application techniques for Apple iPad tablets. This article takes the latest Apple iPad 7 as an example to introduce the film application method. The same applies to mobile phone film. Mobile phones and iPads only have different screen sizes and similar film application methods. Taking tablets as an example, we will introduce the techniques of tempered film application.

Perfect film application four step curve

Wipe the screen vigorously to ensure there is no dust;

Place the tempered film on the screen, ensuring that the screen receiver is aligned with its surrounding environment;

Click in the middle of the screen, and the automatically adsorbed tempered film will diffuse from the middle to the surrounding areas;

If there are bubbles around, lift a little tempered film at the corners and push the bubbles out with your thumb.

1. Introduction to flat film

There are currently two main types of film application, one is high-definition pet film and the other is tempered window film, among which the price of tempered film is relatively expensive. The above picture shows a 9H tempered glass protective film, which is a very high hardness tempered glass film. 9H is the scratch resistance of 9H and is not easily damaged.

2. Clean the screen

Whether it's a new or old iPad, the screen needs to be cleaned before applying the film. Of course, if it's a new iPad, the screen surface doesn't need to be wiped, but in many cases, there will definitely be fingerprints when held, so it's still necessary to clean it. For iPads that are not new, clean them with clean wet tissues, dry tissues, and dust removal stickers.

3. Clean tissues and dust removal stickers.

The black one is a dust removal sticker, and the white one is a tissue. You can use a dust removal sticker to remove surface dust, then wipe with a wet tissue, and then wipe with a dry tissue. You can also use dust removal stickers and wet tissues to wipe, and then use dry tissues to wipe.

4. Tear off the release film and align it with the screen.

Tear off the release film on the outside of the tempered film, then align the tempered film with each hole and edge of the iPad screen and slowly lay it down. This step is crucial. When the tempered film is placed on the screen, you can gently press the middle part with your fingers to make the tempered film adhere to the screen. Be careful when operating.

5. Squeeze out bubbles to fit the screen.

When applying tempered film, you can use your fingers and a cleaning cloth to squeeze the bubbles on the screen from the middle to both sides, and then they can be squeezed out. Usually it is a slight bubble, squeezed out with a dry tissue.

6. Apply tempered film and follow the protective cover.

The installation of tempered films is generally relatively simple. You only need to follow the product manual and gently press it when operating. As long as you master the skills, there are basically very few bubbles in the film.